Snapmaker 2.0 Enclosure
It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.
Laser
Protection
Physical
Safeguards
Dust
Isolation
Exhaust
System
Tri-fold
Magnetic Doors
Door
Detection
Snapmaker 2.0 Enclosure
It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.
Laser
Protection
Physical
Safeguards
Dust
Isolation
Exhaust
System
Tri-fold
Magnetic Doors
Door
Detection
Laser Reduction
The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .
Laser Reduction
The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser Engraving Module, from class four to the lowest level of class one [1] .
Dust Isolation
Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.
Dust Isolation
Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.
Noise Reduction
The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.
Noise Reduction
The Enclosure reduces noise level by up to 10 dB(A) [2] , so you won’t be disturbed when machine is running.
Tri-fold Magnetic Doors
Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.
Tri-fold Magnetic Doors
Pre-assembled doors can be triple-folded [3] , taking up only a very limited space, while providing sufficient childproofing.
Door Detection
Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.
Door Detection
Laser or CNC job pauses automatically when either door is opened [4] , giving you extra protection. And don't worry about your creation – you can resume it with just a few taps.
Keep the Temperature Just Right
Warmth is maintained when you 3D print with high-performance filaments like ABS, so that the print is less likely to warp due to temperature variation.
Keep the Temperature Just Right
Warmth is maintained when you 3D print with high-performance filaments like ABS, so that the print is less likely to warp due to temperature variation.
Built-in LED Strips
Create as you like, whether it’s day or night.
Built-in LED Strips
Create as you like, whether it’s day or night.
Custom Software Support
Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.
Custom Software Support
Control the LED strips and exhaust fan using the Touchscreen or Snapmaker Luban that you're familiar with.
All-purpose Beams for Your Imagination
The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.
All-purpose Beams for
Your Imagination
The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.
Specifications
A350T/F350/A350 Enclosure
A250T/F250/A250 Enclosure
Net Weight
19.3 kg
Net Weight
14.2 kg
Package Dimensions(W × D × H)
900 × 690 × 180 mm
Package Dimensions(W × D × H)
700 × 600 × 260 mm
Package Weight:
22.8 kg
Package Weight:
16.5 kg
Frame Material
Aluminum alloy
Frame Material
Aluminum alloy
Panel Material
Acrylic
Panel Material
Acrylic
Functional Units
LED Strips, Exhaust Fan, Hose
Functional Units
LED Strips, Exhaust Fan, Hose
Specifications
A350T/F350/A350 Enclosure
Net Weight
19.3 kg
Package Dimensions(W × D × H)
900 × 690 × 180 mm
Package Weight:
22.8 kg
Frame Material
Aluminum alloy
Panel Material
Acrylic
Functional Units
LED Strips, Exhaust Fan, Hose
A250T/F250/A250 Enclosure
Net Weight
14.2 kg
Package Dimensions(W × D × H)
700 × 600 × 260 mm
Package Weight:
16.5 kg
Frame Material
Aluminum alloy
Panel Material
Acrylic
Functional Units
LED Strips, Exhaust Fan, Hose
In the Box[5]
Side Folding Door
×1
Side Panel
×1
Top Panel
×1
Hose
×1
Back Panel
×1
Front Folding Door
×1
24 Beam A350-1
×2
48CA Beam A350-1
×1
24 Beam A350-2
×3
48CA Beam A350-2
×1
24 Beam A350-3
with Hall Switch ×1
48CA Beam A350-3
×1
24 Beam A350-4
×1
48CA Beam A350-4
×1
24 Beam A350-4 with
Enclosure Converter ×1
LED Strip Cable
×2
Quick Start Guide
×1
Exhaust Fan
×1
Hose Connector
×1
Touchscreen Holder
×1
Cable Clip
×20
Connecting Cable
×1
Foot Fixture
×4
Folding Door Slider
×8
Snap Bushing
×1
Hose Clamp
×1
M3 Hex Nut
×8
M3 × 10 Hex Socket
Head Screw ×8
M4 Wing Nut
×4
M4 × 20 Hex Socket
Head Screw ×16
M4 × 28 Hex Socket
Short Head Screw ×32
M4 × 12 Hex Socket
Round Head Screw ×34
H2.0 Hex Key
×1
H2.5 Hex Key
×1
M4 × 35 Hex Socket
Head Screw ×4
In the Box[5]
Side Folding Door
×1
Side Panel
×1
Top Panel
×1
Hose
×1
Back Panel
×1
Front Folding Door
×1
24 Beam A350-1
×2
48CA Beam A350-1
×1
24 Beam A350-2
×3
48CA Beam A350-2
×1
24 Beam A350-3
with Hall Switch ×1
48CA Beam A350-3
×1
24 Beam A350-4
×1
48CA Beam A350-4
×1
24 Beam A350-4 with
Enclosure Converter ×1
LED Strip Cable
×2
Quick Start Guide
×1
Exhaust Fan
×1
Hose Connector
×1
Touchscreen Holder
×1
Cable Clip
×20
Connecting Cable
×1
Foot Fixture
×4
Folding Door Slider
×8
Snap Bushing
×1
Hose Clamp
×1
M3 Hex Nut
×8
M3 × 10 Hex Socket
Head Screw ×8
M4 Wing Nut
×4
M4 × 20 Hex Socket
Head Screw ×16
M4 × 28 Hex Socket
Short Head Screw ×32
M4 × 12 Hex Socket
Round Head Screw ×34
H2.0 Hex Key
×1
H2.5 Hex Key
×1
M4 × 35 Hex Socket
Head Screw ×4
Notes:
[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.
[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.
[3] The A150 Enclosure's doors are magnetic, but can't be folded.
[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.
[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.
Notes:
[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.
[2] The test result was obtained in Snapmaker laboratory, which may vary depending on the testing conditions and product iteration, and is for reference only.
[3] The A150 Enclosure's doors are magnetic, but can't be folded.
[4] Door Detection applies only to laser and CNC functions, excluding 3D printing.
[5] The parts shown above are from A350T/A350/F350 enclosure. The size, number and design of the parts may vary depending on the enclosure models.
Customer Reviews
Based on 277 reviews
62%
(172)
26%
(72)
8%
(23)
1%
(3)
3%
(7)
a
Hello,
I'm French and I bought the A350 + rotative module + enclosure.
Can you help on the lightning of the enclosure, please. Can you tell me where to find, in the LUBAN software, the way to turn on the leds of the enclose ?
Grand Merci.
D
The enclosure is built to exacting dimensions, which I am completely impressed with. My only issue was that I had been having trouble with my SN A350 bed not heating, so when I plugged the enclosure in after installation, I was less than happy that it was not recognized by the system. I then went through a week or so of back and forth before finally convincing the Snapmaker Support, to send me a new controller box, which "Surprise! Surprise!" fixed the issue. I am happily printing and etching, and getting myself pumped up enough to try out the CNC part of this well built product.
V
Bought the enclosure a year after buying the Snapmaker 2.0. I used my 3D printer only because the CNC and Laser set off my home smoke detectors (I could have done a better venting job) during my initial testing out of the machine. The enclosure solved my alarm issues and quieted the operation down substantially, so I no longer need to close the door. Packaging and manual were superb like the Snapmaker 2.0 but the door slides and filament holder location, which are usable, are extremely annoying.
V
I like having the enclosure. Two comments, though. First, follow the instructions VERY carefully. Most if not all of the major parts go only one place. The information is there in the instructions but some of the illustrations are small and tough for older eyes especially to read. I had the instructions on my 55 inch screen so I could enlarge them to read better. Second, I don't like the location of the filament holder. It is all the way in the back of the machine, adds depth to the needed space for the machine and is awkward to get to. I printed my own support and will mount it on top of the enclosure.
Overall, very pleased with the machine and the enclosure.
J
Great product from a great company thanks
