Snapmaker Original
Z-Axis Extension Module
Upgrade your Snapmaker Original to acquire bigger 3D print size.
Details
|
|
|
|
Easy to install. The Z-Axis Extension Module is used to replace the original Z-Axis to increase print height. |
Print height is increased to 221mm, which increases the effective print volume by 76.8%. |
|
|
|
|
Made of aluminum and manufactured with anodizing sanding process, the module presents exquisite quality. |
With the same manufacturing process as that of the Original module, printing quality is guaranteed. |
Specifications
Dimensions:
48 x 48 x 368 mm
Effective Length:
221 mm
Applicable Product:
Snapmaker Original 3-in-1 3D Printer
Showcases
Packaging
Installation Guide
Step 1: Replace the Z-Axis
Install the Z-Axis Extension Module according to the instructions in the Quick Start Guide.
Steps 2: Upgrade Firmware
Download the latest firmware from URL https://forum.snapmaker.com/t/downloads-and-updates-for-firmware/1467/11 to upgrade the firmware.
Step 3: Configure Software
Configure Snapmakerjs according to the instructions in the downloaded file.
Snapmaker Original
Z-Axis Extension Module
Upgrade your Snapmaker Original to acquire bigger 3D print size.
Details
|
|
|
|
Easy to install. The Z-Axis Extension Module is used to replace the original Z-Axis to increase print height. |
Print height is increased to 221mm, which increases the effective print volume by 76.8%. |
|
|
|
|
Made of aluminum and manufactured with anodizing sanding process, the module presents exquisite quality. |
With the same manufacturing process as that of the Original module, printing quality is guaranteed. |
Specifications
Dimensions:
48 x 48 x 368 mm
Effective Length:
221 mm
Applicable Product:
Snapmaker Original 3-in-1 3D Printer
Showcases
Packaging
Installation Guide
Step 1: Replace the Z-Axis
Install the Z-Axis Extension Module according to the instructions in the Quick Start Guide.
Steps 2: Upgrade Firmware
Download the latest firmware from URL https://forum.snapmaker.com/t/downloads-and-updates-for-firmware/1467/11 to upgrade the firmware.
Step 3: Configure Software
Configure Snapmakerjs according to the instructions in the downloaded file.
Customer Reviews
Based on 16 reviews
75%
(12)
13%
(2)
6%
(1)
0%
(0)
6%
(1)
A
It can also be used to extend the y-axis for laser engraving. Then, the old y-axis module can be used as second z-axis to create a rigid gantry. Unfortunately, the y-stroke is limited in the 3D-printing mode. (Probably on purpose - to sell more A250s)
L
This is a great machine to start out with, I installed the Z-Axis Extension Module immediately and I'm enjoying this machine very much allthough I am still learning to work with it. I am allready thinking of expanding it to a bigger machine!
K
The only issue I experienced was that I needed to move the control unit up one mounting point so that the filament spool would not jam during printing.
L
Z-Axis Extension Module for Snapmaker Original (VAT Incl.)
V
I've installed the Z-Axis Extension Module easily. Firmware was updated fine. I found how to update Luban to work with the extension. But the program sometimes drops this option to default.
