Matte PLA Filament (1kg)
Snapmaker PLA - Up to 18% Off

SnapSpeed PLA Filament (1kg)
$19.99 $24.99

Matte PLA Filament (1kg)
$18.99 $22.99
Couldn't load pickup availability
Payment methods
Earn [points_amount] when you buy this item.
Snapmaker Matte PLA
Assorted Colors
High Speeed
Stable Performance
Snapmaker Matte PLA
Print It Matte, Keep It Classy
Delivers a soft matte finish that hides layer lines for a clean, professional look.
Ideal for art prints, decor, and sleek prototypes.
Rich Colors, Refined Tones
Steady Matte at High Speed
Prints at speeds up to 300mm/s with no loss in surface quality—just smooth, detailed prints every time.
Superior Print Performance
Prints at speeds up to 300mm/s with no loss in surface quality—just smooth, detailed prints every time.
Easy Support Remove
Easily separates from supports, reducing post-processing time.
Eco-Friendly and Recyclable
Made from recyclable materials, minimizing environmental impact while maintaining excellent performance.
Specifications
RECOMMENDED PRINTING CONDITIONS
*Based on a 0.4mm nozzle. Printing conditions may vary with different nozzle diameters.
Nozzle temperature
190–230 °C
Build plate temperature
25–60 °C
Build surface treatment
Glue when needed
Printing speed
190-300 mm/s
Drying setting
55°C for 6h
PHYSICAL PROPERTIES
Density
1.31g/cm³ at 23°C
Melt index
14–20 g/10min
THERMAL PROPERTIES
Glass transition temperature
60.6°C
Melting temperature
162.6°C
Vicat softening temperature
62.7°C
Heat deflection temperature (ISO 75 1.8MPa)
52°C
Heat deflection temperature (ISO 75 0.45MPa)
57.8°C
MECHANICAL PROPERTIES
Young's modulus (X-Y)
1997±64 MPa
Young's modulus (Z)
1615±54 MPa
Tensile strength (X-Y)
23.2±0.5 MPa
Tensile strength (Z)
12.2±0.7 MPa
Elongation at break
27.8±2.4%
Elongation at break (Z)
0.9±0.1%
Bending modulus (X-Y)
2209±75 MPa
Bending strength (X-Y)
40.4±1.1 MPa
Charpy impact strength (X-Y)
6.7±0.5kJ/㎡
RECOMMENDED PRINTING CONDITIONS
*Based on a 0.4mm nozzle. Printing conditions may vary with different nozzle diameters.
Nozzle temperature
190–230 °C
Build plate temperature
25–60 °C
Build surface treatment
Glue when needed
Printing speed
190-300 mm/s
Drying setting
55°C for 6h
PHYSICAL PROPERTIES
Density
1.31g/cm³ at 23°C
Melt index
14–20 g/10min
THERMAL PROPERTIES
Glass transition temperature
60.6°C
Melting temperature
162.6°C
Vicat softening temperature
62.7°C
Heat deflection temperature (ISO 75 1.8MPa)
52°C
Heat deflection temperature (ISO 75 0.45MPa)
57.8°C
MECHANICAL PROPERTIES
Young's modulus (X-Y)
- 1997±64 MPa
Young's modulus (Z)
1615±54 MPa
Tensile strength (X-Y)
23.2±0.5 MPa
Tensile strength (Z)
12.2±0.7 MPa
Elongation at break
27.8±2.4%
Elongation at break (Z)
0.9±0.1%
Bending modulus (X-Y)
2209±75 MPa
Bending strength (X-Y)
40.4±1.1 MPa
Charpy impact strength (X-Y)
6.7±0.5kJ/㎡