10W High Power Laser Module[1]
Only the Strong Makes It Through
10W
High Power
Auto Focus
Upgraded
Camera Capture
Tailor-made
Software
Step up Your Game with the Cutting-edge Laser Beam Splitters.
The 10W Laser Module is equipped with the most cutting-edge laser beam splitters, effecting a power leap from 5W to 10W. This means you can now play with a wider variety of materials and hammer out more projects.
Meanwhile, the work speed of the 10W Laser Module can be as high as 6000 mm/min, while cutting through basswoods as thick as 8 mm[2]. To put that into perspective, the cutting speed is up to 8 times that of the 1.6W Laser Module[3]. It can literally fulfill a laser job in a blink of an eye.
1.6W and 10W Laser Comparison
Here is a comparison between 1.6W and 10W laser, taking 1.5 mm-thick basswood engraving and cutting as an example.
Engraving Speed
Cutting Speed
Cutting Depth
Not Just About Strength, but Finesse.
With the Fast-axis Collimating (FAC) lenses embedded in the two laser diodes, the module first compresses the laser spot of each laser diodes. Then it combines the laser beams of the two laser diodes using the beam combining technology, resulting in a higher output power and an ultra-fine laser focus (0.05 mm × 0.2 mm), which allows for higher energy density. Smaller laser focus and higher power deliver high-quality laser works with impeccable details.
Get Cracking While We Take Care of the Rest.
The unique wind channel inside the 10W Laser Module provides excellent wind pressure, blowing the fumes away as the laser beam cuts into the material, sending the fumes directly into the grids of the Laser Engraving and Cutting Platform, which then get channeled out, reducing their interference on laser machining.
Auto Focus in Seconds.
No more manual material measuring. Place your material on the platform, and the module will calculate it for you. Thanks to the triangulation technique, the module is able to measure the thickness of your material by obtaining a few sets of data on the camera and light emitter. It will then adjust itself in Z orientation so that the focal point falls right on the material surface[4]. You can finish focusing in a few seconds.
Camera Capture Taken to a Whole New Level.
With the upgraded camera capture process, the wide-angle HD camera captures in one take your material and lets you get an instant preview in Luban of your laser job on the material. Checking the work area is now completely hassle-free.
Tailor-made Software Snapmaker Luban, Making a Pro out of Every Beginner.
Using Snapmaker Luban, you can polish your basic skills and master more sophisticated tricks, from simple image transform to setting the right parameters for varying materials, and slicing 3D models into laser cuttable vectors.
Ready-to-use
Material
Profiles
Converts 3D
Model to 2D
Vector
High
Customizability
Orientation Detection, Be Safe While Being Adventurous.
To protect the user and any bystanders, we included a gyro sensor in the module, which makes sure that no laser beam comes out if the module is incorrectly installed or deviates from its designated position.
A Module of Two Blowing Systems.
Prolonged exposure to high temperature will reduce the lifespan of the laser diode. The 10W Laser Module has two separate blowing systems for its PCBA and its laser diode to make sure the diode is properly cooled off whenever you use it. Under proper use, the lifespan can be as long as 8,000–10,000 hours[5].
Overheat Protection, Better Safe than Sorry.
The module stops working automatically whenever its temperature sensor detects a higher than normal (one that exceeds 55℃/131℉) working temperature. Once the temperature falls back into the normal range, you can resume your job on the Touchscreen.
Expandability, as Always.
The 10W Laser Module is compatible with all models of the Snapmaker 2.0 series apart from the 150 models, and will be compatible with upcoming machines. You can use it with the addons as well, including the Rotary Module, Emergency Stop Button, Air Purifier, and CAN Hub.
Specifications
Snapmaker 10W High Power Laser Module
Model :
TH-L-P100-W450
Laser Power :
10 W
Laser Type :
450–460 nm Semi-conductor
Input Voltage：
24 V
Laser Class :
Class 4
Maximum Work Speed :
6000 mm/min
Operating Temperature :
0℃–35℃
Laser Spot Dimensions :
0.05 mm × 0.2 mm
Work Area :
320 mm × 350 mm (A350/A350T/F350)
230 mm × 250 mm (A250/A250T/F250)
Dimensions :
114 mm × 102 mm × 60 mm
Weight :
0.63 kg
Frame Material :
Aluminum alloy
Data Transmission :
Wi-Fi, USB cable, USB flash drive
Supported Materials for Engraving :
Pinewood, plywood, beechwood, walnut, bamboo, MDF, painted metal, SPTE, stainless steel, anodized aluminum, acrylic, dark glass, slate, brick, ceramic, jade, marble, shale, leather, fabric, canvas, corrugated fiberboard, cardboard
Supported Materials for Cutting :
Pinewood, plywood, beechwood, walnut, bamboo, MDF, black and red acrylic, leather, fabric, canvas, corrugated fiberboard, cardboard
Supported Formats :
.stl, .svg, .png, .jpg, .jpeg, .bmp, .dxf
Laser Engraving and Cutting Platform (320 mm × 350 mm）
Dimensions
(each piece, W × D × H) :
80 mm × 364 mm × 8 mm
Weight (each piece) :
230 g
Material :
Aluminum alloy
Laser Engraving and Cutting Platform (230 mm × 250 mm）
Dimensions
(each piece, W × D × H) :
80 mm × 264 mm × 8 mm
Weight (each piece) :
170 g
Material :
Aluminum alloy
In the Box
10W High Power
Laser Module ×1
Laser Lens ×1
M4 × 8 Hex Socket
Head Screw ×6
Material Bag ×1
(Basswood, Acrylic, Anodized Aluminum)
MDF Calibration
Target ×1
Cotton Swab Packet ×1
Quick Start Guide ×1
Laser Safety
Goggles ×1
After-sales Service
1. The major module of Snapmaker 10W High Power Laser Module is covered by a 1-year limited warranty for the customers from the Non-EU countries and 2-year limited warranty for the customers from the EU countries according to the terms and conditions stated at Snapmaker's Limited Warranty.
2. Return & Refund Service will be provided where it is requested within seven (7) calendar days of receiving Snapmaker 10W High Power Laser Module.
[1] This is a class 4 laser product. You should always operate the 10W Laser Module with the Snapmaker 2.0 Enclosure covered and wear laser safety goggles. Snapmaker shall not be held responsible for any consequences caused by improper use of this product.
[2] Note that you need to perform two cutting jobs in order to cut through an 8 mm basswood. The maximum cutting depth per job for basswood is 5 mm.
[3] The data are obtained based on the 1.5 mm basswoods. Depending on your material, the cutting speed and depth might vary.
[4] This feature applies to flat and regularly shaped materials. Materials that are transparent, highly reflective or of red and black color might not be applicable.
[5] This data is obtained under the condition of typical laser use, and is for reference only. Depending on how each individual users use this product, the data will differ.
10W High Power Laser Module[1]
Only the Strong Makes It Through
10W High Power
Auto
Focus
Upgraded
Camera Capture
Tailor-made
Software
Step up Your Game with the Cutting-edge Laser Beam Splitters.
The 10W Laser Module is equipped with the most cutting-edge laser beam splitters, effecting a power leap from 5W to 10W. This means you can now play with a wider variety of materials and hammer out more projects.
Meanwhile, the work speed of the 10W Laser Module can be as high as 6000 mm/min, while cutting through basswoods as thick as 8 mm[2]. To put that into perspective, the cutting speed is up to 8 times that of the 1.6W Laser Module[3]. It can literally fulfill a laser job in a blink of an eye.
1.6W and 10W Laser Comparison
Here is a comparison between 1.6W and 10W laser, taking 1.5 mm-thick basswootd engraving and cutting as an example.
Engraving Speed
Cutting Speed
Cutting Depth
Not Just About Strength, but Finesse.
With the Fast-axis Collimating (FAC) lenses embedded in the two laser diodes, the module first compresses the laser spot of each laser diodes. Then it combines the laser beams of the two laser diodes using the beam combining technology, resulting in a higher output power and an ultra-fine laser focus (0.05 mm × 0.2 mm), which allows for higher energy density. Smaller laser focus and higher power deliver high-quality laser works with impeccable details.
Get Cracking While We Take Care of the Rest.
The unique wind channel inside the 10W Laser Module provides excellent wind pressure, blowing the fumes away as the laser beam cuts into the material, sending the fumes directly into the grids of the Laser Engraving and Cutting Platform, which then get channeled out, reducing their interference on laser machining.
Auto Focus in Seconds.
No more manual material measuring. Place your material on the platform, and the module will calculate it for you. Thanks to the triangulation technique, the module is able to measure the thickness of your material by obtaining a few sets of data on the camera and light emitter. It will then adjust itself in Z orientation so that the focal point falls right on the material surface[4]. You can finish focusing in a few seconds.
Camera Capture Taken to a Whole New Level.
With the upgraded camera capture process, the wide-angle HD camera captures in one take your material and lets you get an instant preview in Luban of your laser job on the material. Checking the work area is now completely hassle-free.
Tailor-made Software Snapmaker Luban, Making a Pro out of Every Beginner.
Using Snapmaker Luban, you can polish your basic skills and master more sophisticated tricks, from simple image transform to setting the right parameters for varying materials, and slicing 3D models into laser cuttable vectors.
Ready-to-use
Material
Profiles
Converts 3D
Model to 2D
Vector
High
Customizability
Orientation Detection, Be Safe While Being Adventurous.
To protect the user and any bystanders, we included a gyro sensor in the module, which makes sure that no laser beam comes out if the module is incorrectly installed or deviates from its designated position.
A Module of Two Blowing Systems.
Prolonged exposure to high temperature will reduce the lifespan of the laser diode. The 10W Laser Module has two separate blowing systems for its PCBA and its laser diode to make sure the diode is properly cooled off whenever you use it. Under proper use, the lifespan can be as long as 8,000–10,000 hours[5].
Overheat Protection, Better Safe than Sorry.
The module stops working automatically whenever its temperature sensor detects a higher than normal (one that exceeds 55℃/131℉) working temperature. Once the temperature falls back into the normal range, you can resume your job on the Touchscreen.
Expandability, as Always.
The 10W Laser Module is compatible with all models of the Snapmaker 2.0 series apart from the 150 models, and will be compatible with upcoming machines. You can use it with the addons as well, including the Rotary Module, Emergency Stop Button, Air Purifier, and CAN Hub.
Specifications
Snapmaker 10W High Power Laser Module
Model :
TH-L-P100-W450
Laser Power :
10W
Laser Type :
450–460 nm Semi-conductor
Laser Type :
24 V
Laser Class :
Class 4
Maximum Work Speed :
6000 mm/min
Operating Temperature :
0℃–35℃
Laser Spot Dimensions :
0.05 mm × 0.2 mm
Work Area :
320 mm × 350 mm (A350/A350T/F350)
230 mm × 250 mm (A250/A250T/F250)
Dimensions :
114 mm × 102 mm × 60 mm
Weight :
0.63 kg
Frame Material :
Aluminum alloy
Data Transmission :
Wi-Fi, USB cable, USB flash drive
Supported Materials for Engraving :
Pinewood, plywood, beechwood, walnut, bamboo, MDF, painted metal, SPTE, stainless steel, anodized aluminum, acrylic, dark glass, slate, brick, ceramic, jade, marble, shale, leather, fabric, canvas, corrugated fiberboard, cardboard
Supported Materials for Cutting :
Pinewood, plywood, beechwood, walnut, bamboo, MDF, black and red acrylic, leather, fabric, canvas, corrugated fiberboard, cardboard
Supported Formats :
.stl, .svg, .png, .jpg, .jpeg, .bmp, .dxf
Laser Engraving and Cutting Platform (320 mm × 350 mm)
Dimensions (each piece, W × D × H） :
80 mm × 364 mm × 8 mm
Weight (each piece) :
230 g
Material :
Aluminum alloy
Laser Engraving and Cutting Platform (230 mm × 250 mm)
Dimensions (each piece, W × D × H） :
80 mm × 264 mm × 8 mm
Weight (each piece) :
170 g
Material :
Aluminum alloy
In the Box
10W High Power
Laser Module ×1
Laser Lens
×1
M4 × 8 Hex Socket
Head Screw
×6
Material Bag ×1
(Basswood, Acrylic, Anodized Aluminum)
MDF Calibration
Target ×1
Cotton Swab Packet
×1
Quick Start Guide
×1
Laser Safety
Goggles ×1
×1
[1] This is a class 4 laser product. You should always operate the 10W Laser Module with the Snapmaker 2.0 Enclosure covered and wear laser safety goggles. Snapmaker shall not be held responsible for any consequences caused by improper use of this product.
[2] Note that you need to perform two cutting jobs in order to cut through an 8 mm basswood. The maximum cutting depth per job for basswood is 5 mm.
[3] The data are obtained based on the 1.5 mm basswoods. Depending on your material, the cutting speed and depth might vary.
[4] This feature applies to flat and regularly shaped materials. Materials that are transparent, highly reflective or of red and black color might not be applicable.
[5] This data is obtained under the condition of typical laser use, and is for reference only. Depending on how each individual users use this product, the data will differ.
