Snapmaker 2.0
Straight Groove V-bits (3 Bits)
Snapmaker 2.0
Straight Groove V-bits (3 Bits)
Wear resistant
Broad application
Wider flute
Wear resistant
Broad application
Wider flute
Description
Straight Groove V-bits
UF20 tungsten steel alloy with high hardness and wear resistance, not only is it suitable for epoxy tooling material, but it is also compatible with a dozen materials including carbon fibersheet, MDF and ebony.
A better choice for 4-axis CNC
The longer shank and wider flute carve cylinders or similarly shaped objects more efficiently.
High Precision
Adjust settings in Snapmaker Luban software and obtain optimal results with a few small tweaks.
Straight Groove V-bits
UF20 tungsten steel alloy with high hardness and wear resistance, not only is it suitable for epoxy tooling material, but it is also compatible with a dozen materials including carbon fibersheet, MDF and ebony.
A better choice for 4-axis CNC
The longer shank and wider flute carve cylinders or similarly shaped objects more efficiently.
High Precision
Adjust settings in Snapmaker Luban software and obtain optimal results with a few small tweaks.
Showcases
Hollow Candle Holder
Device:
Snapmaker 2.0 A350 and Rotary Module A350
Time:
9 h
Processing Mode:
4-axis CNC carving
Material:
Epoxy tooling material
Work Speed:
400 mm/min
Step Down:
5 mm
Lion With A Shield
Device:
Snapmaker 2.0 A350 and Rotary Module A350
Time:
9 h
Processing Mode:
4-axis CNC carving
Material:
Epoxy tooling material
Work Speed:
400 mm/min
Step Down:
5 mm
Astronaut
Device:
Snapmaker 2.0 A350 and Rotary Module A350
Time:
10 h
Processing Mode:
4-axis CNC carving
Material:
Epoxy tooling material
Work Speed:
400 mm/min
Step Down:
5 mm
Astronaut
Device:
Snapmaker 2.0 A350 and Rotary Module A350
Time:
10 h
Processing Mode:
4-axis CNC carving
Material:
Epoxy tooling material
Work Speed:
400 mm/min
Step Down:
5 mm
Specifications
| Shank Diameter | Included Angle | Total Length | Flute Length | Tip Diameter |
|
3.175 mm |
20° |
50 mm |
24 mm |
0.3 mm |
Shank Diameter:
3.175 mm
Included Angle:
20°
Total Length:
50 mm
Flute Length:
24 mm
Tip Diameter:
0.3 mm
Notes:
• This bit is compatible with Snapmaker 2.0 devices and can be used in both 4-axis CNC and regular CNC.
• Due to the longer shank, please pay attention to the work speed and step down settings to avoid potential risks of bit breaking and danger.
